All About Drugs

Molecular Formula: C₄₀H₅₀N₆O₈S   Molecular Weight: 774.9254

1.  Abbenante, G; Fairlie, DP (2005). “Protease inhibitors in the clinic”. Medicinal chemistry 1 (1): 71–104. PMID 16789888.

 

2. Synthesis of BILN 2061, an HCV NS3 protease inhibitor with proven antiviral effect in humans
Org Lett 2004, 6(17): 2901

http://pubs.acs.org/doi/full/10.1021/ol0489907

 

3. Efficient synthesis of (S)-2-(cyclopentyloxycarbonyl)-amino-8-nonenoic acid: Key buiding block for BILN 2061, an HCV NS3 protease inhibitor
Org Process Res Dev 2007, 11(1): 60

 

4. Chinese Journal of Chemistry, 2011 ,  vol. 29,  7  pg. 1489 – 1502

DOI: 10.1002/cjoc.201180270

 http://onlinelibrary.wiley.com/doi/10.1002/cjoc.201180270/abstract;jsessionid=F5F4331F5A95D00728394A254C2B1AE7.f01t04

…………………………..

US 8222369

WO 2006071619

WO 2000059929

WO 2004092203

WO 2004039833

WO 2004037855

WO 2006036614

WO 2006033878

WO 2005042570

WO 2004093915

………………………………………………………………………..

https://www.google.co.in/patents/US8222369

 

 

 

 

 

…………………………………………………………………..

http://www.google.com/patents/WO2000059929A1

COMPD 822 IS CILUPREVIR IN TABLE 8

EXAMPLE 8 Synthesis of 4-hydroxy-7-methoxy-2[4(2-isopropylaminothiazolyl)] quinoline (8f ) Note: [ A variety of 2-alkylaminothiazolyl substituents were made using the same synthetic scheme where compound 8b was replaced by other alkyl thioureas.]

 

 

8b 8c 8d

A. The protocol used for the conversion of -anisidine to 8a was identical to that described in the literature: F.J. Brown et al. J. Med. Chem. 1989, 32 , 807-826. However, the purification procedure was modified to avoid purification by chromatography. The EtOAc phase containing the desired product was treated with a mixture of MgSO₄, charcoal and 5% w/w (based on expected mass) silica gel. After filtration on celite, the product was triturated with ether. Compound 8a was obtained as a pale brown solid in >99% purity (as confirmed by HPLC).

B. A suspension of isopropyl thiourea (8b, 3.55 g, 30 mmol) and 3- bromopyruvic acid (8c, 5 g, 1 eq.) in dioxane (300 mL , 0.1 M) was heated to 80 °C.

Upon reaching 80 C the solution became clear and soon after the product precipitated as a white solid. After 2 hours of heating, the solution was cooled to RT and the white precipitate was filtered to obtain compound 8d in high purity (>98% purity as confirmed by NMR) and 94% yield (7.51 g). C. A mixture of the carboxylic acid 8d (4.85 g, 18.2 mmol) and the aniline derivative 8a (3 g, leq.) in pyridine (150 mL, 0.12 M) was cooled to -30 °C (upon cooling, the clear solution became partially a suspension). Phosphorus oxychloride (3.56 ml, 2.1 eq.) was then added slowly over a 5 min period. The reaction was stirred at -30 C for 1 h, the bath was removed and the reaction mixture was allowed to warm-up to RT. After 1.5 h the reaction mixture was poured into ice, the pH was adjusted to 11 with aqueous 3N NaOH, extracted with CH₂C1₂, dried over anhydrous MgSO₄, filtered and concentrated under vacuum. The beige solid was then purified by flash chromatography (45% EtOAc in hexane) to give compound 8e as a pale yellow solid in 73% yield (6.07 g). D. A solution of tBuOK (2.42 g, 21.6 mmol) in anhydrous tBuOH (40ml, 0.14 M, distilled from Mg metal) was heated to reflux. Compound 8e (1.8g, 5.4 mmol) was added portion-wise over 5 min and the dark red solution formed was stirred at reflux for an additional 20 min (completion of the reaction was monitored by HPLC). The mixture was cooled to RT and HCl was added (4 N in dioxane, 1.5 eq.). The mixture was then concentrated under vacuum, in order to assure that all of the

HCl and dioxane were removed, the product was re-dissolved twice in CH₂C1₂ and dried under vacuum to finally obtain the HCl salt of compound 8f as a beige solid (1.62 g, 93% pure by HPLC). The product was then poured into a phosphate buffer

(IN NaH₂PO₄, pH=~4.5) and sonicated. The beige solid was filtered and dried under vacuum to give compound 8f (1.38 g, 81% yield) as a beige solid (91% pure by HPLC).

*H NMR (400 MHz, DMSO) δ 8.27 (s, IH), 8.12 (d, IH, J = 9.2 Hz), 7.97 (br.s, IH), 7.94 (s, IH), 7.43 (s, IH), 7.24 (dd, IH, J = 9.2, 2.2 Hz), 3.97 (m, IH), 3.94 (s, 3H), 1.24 (d, 2H, J = 6.4 Hz)

…………

METHYL ESTER

EXAMPLE 34c

Using the same procedure as described in example 34 but reacting bromoketone 34f with commercially available N-iso-propylthiourea gave # 822

 

Η NMR (400 MHz, DMSO-d₆) δ 8.63 (s, IH), 8.33-8.23 (bs, IH), 8.21 (d, J = 9.2 Hz, IH), 8.04 (d, J = 8.3 Hz, IH), 7.86 (bs, IH), 7.77 (s, IH), 7.35-7.23 (m, 2H), 5.81 (bs, IH), 5.52 (dd, J = 8.5 Hz, IH), 5.27 (dd, J = 9.2 Hz, IH), 4.65 (d, J = 11.8 Hz, IH), 4.51 (dd, J = 7.6 Hz, IH), 4.37 (bs, IH), 4.15 (bs, IH), 4.07-3.98 (m, 2H), 3.97 (s, 3H), 3.88 (d, J = 8.9 Hz, IH), 2.60-2.53 (m, 2H), 2.47-2.37 (m, 2H), 2.19-2.10 (dd, J = 9.2 Hz, IH), 1.80-1.64 (m, 2H), 1.63-1.29 (m, 13H), 1.27 and 1.25 (2 x d, J – 6.5 Hz, 6H), 1.23-1.09 (m, 2H). MS; es⁺: 775.0 (M + H)⁺, es : 772.9 (M – H)\

CILUPREVIR IS FREE ACID OF ABOVE AND HAS ENTRY 822 TABLE 8

………

FREE AMINO COMPD

(Table 8)

 

 

 

 

A. To a solution of the macrocyclic intermediate 23b (13.05 g, 27.2 mmol, 1.0 eq.), Ph₃P (14.28 g, 54.4 mmol, 2.0 eq) and 2-carboxymethoxy-4-hydroxy-7- methoxyquinoline (WO 00/09543 & WO 00/09558) (6.67 g, 28.6 mmol, 1.05 eq) in

THF (450 mL) at 0°C, DIAD (10.75 mL, 54.6 mmol, 2.0 eq) was added dropwise over a period of 15 min. The ice bath was then removed and the reaction mixture was stirred at RT for 3 h. After the complete conversion of starting material to products, the solvent was evaporated under vacuum, the remaining mixture diluted with

EtOAc, washed with saturated NaHCO₃ (2x) and brine (lx), the organic layer was dried over anhydrous MgSO4, filtered and evaporated to dryness. Pure compound 34a was obtained after flash column chromatography; the column was eluted first with hexane/EtOAc (50:50), followed by CHCl₃/EtOAc (95:5) to remove Ph₃PO and

DIAD byproducts and elution of the impurities was monitored by TLC. Finally, the desired product 34a was eluted from the column with CHC1₃/ EtOAc (70:30).

Usually, the chromatography step had to be repeated 2-3 times before compound 34a could be isolated in high purity as a white solid with an overall yield of 68% (12.8 g, 99.5% pure by HPLC).

B. To a solution of the Boc-protected intermediate 34a (1.567g) in CH₂C1₂ (15 mL), 4N HCl in dioxane (12 mL) was added and the reaction mixture was stirred at RT for 1 h. [In the event that a thick gel would form half way through the reaction period, an additional 10 mL CH₂C1₂ was added.] Upon completion of the deprotection the solvents were evaporate to dryness to obtain a yellow solid and a paste like material. The mixture was redissolved in approximately 5% MeOH in

CH₂C1₂ and re-evaporated to dryness under vacuum to obtain compound 34b as a yellow solid, which was used in the next step without any purification. C. To a solution of cyclopentanol (614 μL, 6.76 mmoL) in THF (15 mL), a solution of phosgene in toluene (1.93 M, 5.96 mL, 11.502 mmol) was added dropwise and the mixture was stirred at R.T. for 2 h to form the cyclopentyl chloroformate reagent (z). After that period, approximately half of the solvent was removed by evaporation under vacuum, the remaining light yellow solution was diluted by the addition of CH₂C1₂ (5 mL) and concentrated to half of its original volume, in order to assure the removal of all excess phosgene. The above solution of the cyclopentyl chloroformate reagent was further diluted with THF (15 mL) and added to the amine-2HCl salt 34b. The mixture was cooled to 0 C in an ice bath, the pH was adjusted to -8.5-9 with the addition of Et₃N (added dropwise) and the reaction mixture was stirred at 0 C for 1 h. After that period, the mixture was diluted with

EtOAc, washed with water (lx), saturated NaHCO₃ (2x), H₂O (2x) and brine (lx).

The organic layer was dried over anhydrous MgSO₄, filtered and evaporated under vacuum to obtain a yellow-amber foam. Compound 34c was obtained as a white foam after purification by flash column chromatography (using a solvent gradient from 30% hexane to 20% hexane in EtOAc as the eluent) in 80% yield (1.27 g) and >93% purity. D. The dimethyl ester 34c (1.17g) was dissolved in a mixture of

THF/MeOH/H₂O (20 mL, 2:1:1 ratio), and an aqueous solution of NaOH (1.8 mL,

IN, 1 eq.) was added. The reaction mixture was stirred at RT for 1 h before it was evaporated to dryness to obtain the sodium salt 34d as a white solid (-1.66 mmol). Compound 34d was used in the next step without purification.

E. The crude sodium salt 34d (1.66 mmoL) was dissolved in THF (17 mL), Et₃N was added and the mixture was cooled to 0 C in an ice bath. Isobutylchloroformate

(322 μl, 2.5 mmol) was added dropwise and the mixture was stirred at 0 C for 75 min. After that period, diazomethane (15 mL) was added and stirring was continued at 0 C for 30 min and then at RT for an additional 1 h. Most of the solvent was evaporated to dryness under vacuum, the remaining mixture was diluted with EtOAc, washed with saturated NaHCO₃ (2x), H₂O (2x) and brine (lx), dried over anhydrous MgSO₄, filtered and evaporated to dryness to obtain compound 34e as a light yellow foam (1.2g, -1.66 mmol). The diazoketone intermediate 34e was used in the next step without purification.

F. The diazoketone 34e (1.2g, 1.66 mmoL) dissolved in THF (17 mL) was cooled to 0 C in an ice bath. A solution of aqueous HBr (48%, 1.24 mL) was added dropwise and the reaction mixture was stirred at 0 C for 1 h. The mixture was then diluted with EtOAc, wash with saturated NaHCO₃ (2x), H₂O (2x) and brine (lx), the organic layer was dried over anhydrous MgSO₄, filtered and evaporated to dryness to obtain the β-bromoketone intermediate 34f as a light yellow foam (-1.657 mmol).

G. To a solution of the bromoketone 34f (600 mg,0.779 mmol) in isopropanol (5 mL), thiourea (118 mg, 1.55 mmol) was added and the reaction mixture was placed in a pre-heated oil bath at 75 C where it was allowed to stir for 1 hr. The isopropanol was then removed under vacuum and the product dissolved in EtOAc

(100 mL). The solution was washed with saturated NaHCO₃ and brine, the organic layer was dried over anhydrous Na₂SO₄, filtered and evaporated to afford the crude product 34g (522 mg) as a red-brown solid. This material was used in the final step without any further purification.

H. The crude methyl ester 34g (122 mg, 0.163 mmol) was dissolved in a solution of THF/MeOH/H₂O (2:1:1 ratio, 4 mL) and saponified using LiOH»H₂O (89 mg, 2.14 mmol). The hydrolysis reaction was carried out over a 12-15 h period at RT. The solvents were then removed under vacuum and the crude product purified by C18 reversed phase HPLC, using a solvent gradient from 10% CH₃CN in H₂O to 100%

CH₃CN, to afford the HCV protease inhibitor #812 as a yellow solid (24 mg, 20% overall yield for the conversion of intermediate 34f to inhibitor #812).

*H NMR (400 MHz, DMSO-d₆) δ 8.63 (s, IH), 8.26-8.15 (m, 2H), 7.79 (bs, IH), 7.72

(bs, IH), 7.50 (bs, 2H), 7.33-7.25 (m, 2H), 5.77 (bs, IH), 5.52 (dd, J = 8.3 Hz, IH), 5.27 (dd, J = 9.2 Hz, IH), 4.64 (d, J = 10.8 Hz, IH), 4.50 (dd, J = 8.3 Hz, IH), 4.39-4.31 (m, IH), 4.08-3.99 (m, 2H), 3.94 (s, 3H), 3.87 (d, J = 9.5 Hz, 2H), 2.65-2.53 (m, 2H), 2.46- 2.36 (m, 2H), 2.20-2.12 (dd, J = 8.6 Hz, IH), 1.80-1.64 (m, 2H), 1.63-1.06 (m, 14H). MS; es⁺: 733.2 (M + H)⁺, es^“: 731.2 (M – H)\

………………..

http://www.google.com/patents/WO2006036614A2

(Z)-( 1S,4R, 14S, 18R)- 14-Cyclopentyloxycarbonylamino- 18-[2-(2- isopropylamino-thiazol-4-yl)-7-methoxy-quinolin-4-yloxy]-2,15-dioxo-3,16-diaza- tricyclo[14.3.0.0 ‘ ]nonadec-7-ene-4-carboxylic acid , whose chemical structure is as follows:

, provided for in Tsantrizos et al., U.S. Patent No. 6,608,027 Bl,

…………………………

https://www.google.co.in/patents/WO2005090383A2

ENTRY 218

…………………..

http://www.google.com/patents/WO2004039833A1

 

……………..

A new procedure for the practical synthesis of (S)-2-(cyclopentyloxycarbonyl)amino-8-nonenoic acid, a key building block for BILN 2061, an HCV NS3 protease inhibitor, has been developed. The key step features a kinetic resolution of racemic 2-acetylamino-8-nonenoic acid with acylase I. In addition, the undesired (R)-2-acetylamino-8-nonenoic acid was recycled after racemization. The procedure was implemented for the production of (S)-2-(cyclopentyloxycarbonyl)amino-8-nonenoic acid on pilot-plant scale.

 

……………

nmr

Synthesis of BILN 2061, an HCV NS3 protease inhibitor with proven antiviral effect in humans
Org Lett 2004, 6(17): 2901

http://pubs.acs.org/doi/full/10.1021/ol0489907

http://pubs.acs.org/doi/suppl/10.1021/ol0489907/suppl_file/ol0489907si20040715_032207.pdf  procedure

http://pubs.acs.org/doi/suppl/10.1021/ol0489907/suppl_file/ol0489907si20040715_032254.pdf nmr spectra

BILN 2061:

Methyl ester 18 (2.69 g, 3.41 mmol) was dissolved in a mixture of THF
(40 mL), MeOH (20 mL) and water (20 mL) and added LiOH.H2O (1.14 g, 27.3 mmol).The resulting mixture was left to stir at RT for 15 h. The solvents were then removedunder reduced pressure and the crude product was redissolved with EtOAc and dilutedwith brine. The pH of the aqueous layer was adjusted to 6 with aqueous HCl (1N) and theaqueous phase was extracted with EtOAc (3x). The combined organic phase werewashed with water, brine, dried over MgSO4 and concentrated under reduced pressure toafford BILN 2061 as a yellow solid (2.63 g, 99% yield). HPLC(A) 99%, MS m/z (ES+)773 (M+H)+, (ES-) 775 (M-H)-;

1H NMR (DMSO-d6) δ 8.63 (s, 1H), 8.26-8.15 (m, 2H),
7.79 (bs, 1H), 7.72 (bs, 1H), 7.50 (bs, 2H), 7.33-7.25 (m, 2H), 5.77 (bs, 1H), 5.52 (dd, J=8.3 Hz, 1H), 5.27 (dd, J= 9.2 Hz, 1H), 4.64 (d, J= 10.8 Hz, 1H), 4.50 (dd, J= 8.3 Hz, 1H),4.39-4.31 (m, 1H), 4.08-3.99 (m, 2H), 3.94 (s, 3H), 3.87 (d, J= 9.5 Hz, 2H), 2.65-2.53(m, 2H), 2.46-2.36 (m, 2H), 2.20-2.12 (dd, J= 8.6 Hz, 1H), 1.80-1.64 (m, 2H), 1.63-1.06(m, 14H); HRMS calcd for C40H51N6O8S: 775.3489; found: 775.3476

 

…………………………

WO2007019674A1	Aug 3, 2006	Feb 22, 2007	Boehringer Ingelheim Int	Viral polymerase inhibitors
WO2010021717A2 *	Aug 20, 2009	Feb 25, 2010	Sequoia Pharmaceuticals, Inc.	Hcv protease inhibitors
WO2010080874A1	Jan 7, 2010	Jul 15, 2010	Scynexis, Inc.	Cyclosporine derivative for use in the treatment of hcv and hiv infection
EP1455809A2 *	Dec 13, 2002	Sep 15, 2004	Bristol-Myers Squibb Co.	Inhibitors of hepatitis c virus
EP2364984A1	Aug 28, 2006	Sep 14, 2011	Vertex Pharmaceuticals Incorporated	Inhibitors of serine proteases
EP2366704A1	Aug 28, 2006	Sep 21, 2011	Vertex Pharmaceuticals Incorporated	Inhibitors of serine proteases
US7368452	Jul 18, 2006	May 6, 2008	Enanta Pharmaceuticals, Inc.	Quinoxalinyl macrocyclic hepatitis C serine protease inhibitors
US7608590	Jan 28, 2005	Oct 27, 2009	Medivir Ab	HCV NS-3 serine protease inhibitors
US7671032	Jan 28, 2005	Mar 2, 2010	Medivir Ab	HCV NS-3 serine protease inhibitors
US7816348	Jan 29, 2007	Oct 19, 2010	Boehringer Ingelheim International Gmbh	Viral polymerase inhibitors
US7897622	Aug 10, 2007	Mar 1, 2011	Boehringer Ingelheim International Gmbh	Viral polymerase inhibitors
US8148399	Jul 28, 2006	Apr 3, 2012	Tibotec Pharmaceuticals Ltd.	Macrocyclic inhibitors of hepatitis C virus
US8153800	Aug 3, 2011	Apr 10, 2012	Tibotec Pharmaceuticals Ltd.	Macrocyclic inhibitors of hepatitis C virus
US8242140	Jul 31, 2008	Aug 14, 2012	Boehringer Ingelheim International Gmbh	Viral polymerase inhibitors
US8349869	Mar 6, 2012	Jan 8, 2013	Tibotec Pharmaceuticals Ltd.	Macrocylic inhibitors of hepatitis C virus
US8476257	Dec 3, 2008	Jul 2, 2013	Boehringer Ingelheim International Gmbh	Viral polymerase inhibitors
US8541402	May 3, 2012	Sep 24, 2013	Boehringer Ingelheim International Gmbh	Viral polymerase inhibitors

WO2000059929A1 *	Apr 3, 2000	Oct 12, 2000	Boehringer Ingelheim Ca Ltd	Macrocyclic peptides active against the hepatitis c virus
WO2003053349A2 *	Dec 13, 2002	Jul 3, 2003	Squibb Bristol Myers Co	Inhibitors of hepatitis c virus
WO2003064455A2 *	Jan 24, 2003	Aug 7, 2003	Boehringer Ingelheim Ca Ltd	Macrocyclic peptides active against the hepatitis c virus
WO2003066103A1 *	Feb 5, 2003	Aug 14, 2003	Boehringer Ingelheim Pharma	Pharmaceutical compositions for hepatitis c viral protease inhibitors